Kolpin 10-0520 X-Factor Plow Bedienungsanleitung PDF herunterladen (Seite 8)

NOTICE

For ease of assembly, loosely install all fasteners.

Torque all fasteners to specification after all remaining

blade components have been assembled.

BEFORE YOU BEGIN:

• Please read and understand all instructions.

• Verify all parts and tools are accounted for.

• To ensure a satisfactory installation, follow all steps

correctly and in the sequence described.

• All directions referring to right and left are when the

rider is sitting on the machine

INSTALLATION NOTES:

TOOLS REQUIRED:

• Basic Hand Wrench and Socket Set

• Torque Wrench

• Plastic Cutting Tool

NOTICE

Depending on application, some trimming of plastic guards

or panels may be required to install the Forward Mount.

NOTICE

Refer to Installation Steps A, B, C or D of the Forward

Mount installation manual, depending on your application.

NOTICE

Blade hinge parts must pivot - See Illustration and notes

Initial spring

tension setting:

With spring

attached to blade

hinge, thread

locknut onto the

eyebolt until

spring coils begin

to open slightly

Loosen nut

approximately 1/8-1/4

turn after tightening

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 20 21

Keine Kommentare

Kolpin 10-0520 X-Factor Plow Bedienungsanleitung Seite 8